Defoamer

Update: 2015/2/5      View:
  • Brand:    
  • Type:    
  • Order Online
Introduction

天然气生产到了中后期,为了提高天然气产量一般采用泡排工艺。即向气井中注入起泡剂,使水成为水泡,降低其密度以便带出更多的天然气。然而这种水泡进入输气管道后,因不能和天然气彻底分离,而且对管道和下游设备带来的危害,并影响气体的准确计量。因此必须予以消除,传统的消泡方法,是向输气管道中注入消泡剂,使之与里面的起泡剂进行化学反应,消除水泡。这种消泡方法由于混合不均,消泡效果差,且消泡剂的用量很大,浪费严重

Natural gas production in the later period, in order to improve the yield of the general use of foaming process of natural gas. That is to gas injection foaming agent, the water becomes vesicular, reducing its density so as to bring out more natural gas. However the blisters into the gas pipeline, because cannot and gas completely separated,harm and bring on piping and downstream equipment, accurate measurement and the influence of gas. Thereforemust be eliminated, the traditional method of defoaming, is injected into the gas pipeline of defoaming agent,foaming agent and make the inside of the chemical reaction, eliminate blisters. The defoaming method because ofuneven mixing, defoaming effect is poor, and a large amount of defoaming agent, serious waste

本公司针对以上问题研制了两种消泡器,它能使消泡剂和起泡剂充分混合、相容,充分反应,达到完全消泡的目的。

The company in view of the above problems, we developed two kinds of defoaming device, it can make thedefoaming agent and agent are fully mixed, compatibility, foaming reaction fully, completely attain the purpose of defoaming.

一、液体消泡器

A, liquid defoaming device

液体消泡器是针对消泡剂是液体的状态的情况而制定的。

Liquid defoaming device is for defoaming agent is liquid state and the development of the.

1、功能特点及作用

1, function characteristics and role

①消泡器壳体按压力容器设计制造,安全可靠;

The defoamer shell design according to the pressure vessel manufacturing, safe and reliable;

②结构简单,安装方便,便于维护;

The advantages of simple structure, convenient installation, convenient maintenance;

③节约消泡剂用量,大幅度降低生产成本;

The saving amount of defoaming agent, greatly reduce the production cost;

④提高天然气计量的准确性;

To improve the accuracy of natural gas measurement;

⑤大幅度减少下游管道的沉积水,减少管道的通球次数,保护管道及下游设备,提高其使用寿命。

The greatly reduced water deposited downstream pipeline, reduce the number of pipeline pigging, protect thepiping and downstream equipment, improve its service life.



二、固体消泡器

Two, solid defoamer

固体消泡器是针对消泡剂是固体工况而研制的,使用固体消泡剂较之于液体消泡剂有节能和降低成本的优势,因而研制固体消泡剂具有较高的价值。

Solid defoaming device is developed for defoaming agent is a solid state, the use of solid defoamer compared withliquid defoaming agent has the advantages of saving energy and reducing the cost, so the development of soliddefoaming agent has high value.

性能特点:

Performance characteristics:

1.水汽分流,水能与固体消泡剂充分接触,使固体消泡剂的溶解量达到消泡的要求;

1 water diversion, water and solid defoamer full contact, the dissolved amount of solid fire foam agents reach the defoaming requirement;

2.设有二次混合装置,使消泡剂和水中起泡剂充分混合均匀、反应,达到完全消泡的目的;

2 is provided with two mixing device, the defoaming agent and water foaming agent are fully mixed evenly, reaction,to complete the purpose of defoaming;

3.不消耗电能,是节能型产品;

3 no electric energy consumption, is an energy saving product;

4.安装和操作简便,安全可靠;

4 installation and operation is simple, safe and reliable;

5.设有消泡剂溶解信号,可实行远程监控。

5 a defoaming agent dissolved signal, can implement remote monitoring.


More Products